How to use the VaporBlunt 2.0

Vapor BLUNT 2.0

Loading The VaporBLUNT 2.0

First thing we’re going to do is unscrew the trim ring down near the base of the unit, and fill out herb chamber. It is very important to note that while you should completely fill the space with material do not tamp or pack it down in any way, shape or form. This will inhibit airflow and give you a sub-optimal experience.

As an aside, the herb can run all over in there while you pack it, so take your time and make sure everything gets in the chamber before closing it back up. When using oils, you will remove the herb chamber and place the oil attachment inside, while connecting the glass drawing tube to inhale the fine concentrated vapor. A neat addition indeed.

I recommend starting off on heat level 3.

I recommend starting off on heat level 3.

Heating the VaporBLUNT 2.0

For a unit with only a single button to toggle, one would think that the learning curve would be minimal, but you actually have to apply some dexterity here, and get the taps down to get the right setting. Let me start from the beginning. A single push will turn on the unit and give you a battery life read, while subsequent pushes will allow you to select your temperature from any one of the 5 settings ranging from 370 to 470 degrees Fahrenheit.

You’re going to see each level flash green until it’s normal temp has been reached, and when you achieve your desired setting and it shows a solid color, that means you’re ready to burn baby burn! …er vape. For the oils, make sure you have the temp set to max, as this is the standard practice for the unit regarding all things non-flowering.

THe old stir tool cap for the VaporBLUNT (left) and the new VB 2.0 cap (right).

The old stir tool cap for the VaporBLUNT (left) and the new VB 2.0 cap (right).

Using The VaporBLUNT 2.0

Now that we’re all set to use the darn thing, you need to grab one of the two mouthpieces that come with the unit(one is actually flavored mint, ha), and affix it to the end nozzle. From this point on, welcome to flavor country. I also highly recommend using the waterpipe attachment for this aspect, as the vapor reaches a whole new level of clean taste and cooler temp.

I myself use the double shower head version and fill the water just above the second head without worry as it does have a built-in splash guard for any close encounters with the wet stuff. Cool to note that the waterpipe attachment comes with not only a nozzle for your 2.0, but one that is compatible with the original VaporBLUNT. Very cool.

Pinnacle portable vaporizer
Be Sociable, Share!

You might also like: