How do I get the screen out of the VaporBLUNT?

Pinnacle portable vaporizer

The easiest way to remove the screen from the VaporBLUNT is to take the stir tool top and use the hooked end of the stir tool to catch the little tab that sticks out on the top part of the screen. Usually hooking it just right will pop the screen right out.

If you neglected cleaning the VaporBLUNT for a couple uses it is going to be a lot harder to remove. In extreme cases using the sharp point of a knife to try to jar it loose works well, or well enough that you can loosen it and then use the stir tool to pull it out the rest of the way.

Back to FAQ

Find out where you should buy your VaporBLUNT

Vapor BLUNT 2.0